CONSTRUCTION • DEMOLITION • FORESTRY • RECYCLING
ROAD BUILDING • COMPOSTING • GRINDING & SHREDDING
Serving the Western U.S. since 1953
Call Us Today!
(800) 77-BEJAC
Need Parts? Call
(877) 54-BEJAC
There are three filters in your machines that you need to check on a regular basis to minimize wear and to keep your machine running at its best: engine oil filters, air filters, and fuel filters.
Engine oil filters
This filter helps remove contaminants from your machine's oil that can accumulate during extended periods, as the oil keeps your engine clean. The problem is that contaminants build up in the filter over time, reducing its effectiveness. This process is especially common when you are operating in dirty and dusty environments or extreme weather conditions. As a rule of thumb, you should change the oil filter every time you change the oil as a preventive measure.
Air filters
The air filters clean the air that goes into the engine, catching particles that could damage internal engine parts. The filter becomes dirty or and can become clogged over time, which restricts air flow and harms performance, because there isn't enough air going into the engine.
There is no regular interval for changing the air filter; you need to change it when it reaches maximum restriction. In fact, even removing the filter to inspect it introduces far more dust and contaminants into the system than leaving it alone. Most modern machines have a sensor that indicates when the filter needs to be changed. If your machine notifies you that it is time to change the filter, then you should switch it out as soon as possible to prevent performance issues. Remove only the outer air filter, wipe down the inside of the housing using a damp cloth, and then remove the inner filter. Never knock or blow the dirt off and reuse any air filter.
Fuel filters
Fuel filters are designed to catch particles, debris, or impurities in the fuel tank before the fuel reaches the pump, to ensure only clean fuel enters your engine. Like any filter, debris will clog it over time and will force the fuel pump to work harder and less efficiently. When your fuel filter is clogged, and you accelerate, less fuel enters the engine, which forces it to operate with a leaner fuel mixture and causes it to lose power.
It is important to replace fuel filters periodically to keep your fuel pump from over working and to maintain smooth engine operation. Check your owner's manual to see how often the manufacturer recommends changing your machine's filters.
Don't take shortcuts
Putting off changing any of these filters or taking shortcuts, like pulling out the air filters and banging them against the machine in order to clean them, can have detrimental effects on your equipment. To keep everything running at its best, always change filters at the manufacturer's recommended interval or when the sensors on your engine indicate it's time for a filter replacement.
For more information on filter maintenance, contact the experts at Bejac